V-belt Movendis PP-3VX890-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 3VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-3VX890-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-3VX890-EPDM-AS and any equivalents.
The Movendis PP-3VX890-EPDM-AS is a cogged narrow V-belt in the 3VX profile with a length of 2261 mm. It belongs to the PowerPlus EPDM Cogged Raw Edge Narrow series. To match it to the belt being replaced, read the marking on the back of the old belt and compare the profile and length.
Start by locating the part number printed on the back of the belt you are replacing. Confirm that the profile reads 3VX and that the length is stated as 2261 mm. If the old belt is worn or the marking is difficult to read, measure the outside length and check the cross-section against a known 3VX belt before ordering.
The PP-3VX890-EPDM-AS is a cogged narrow V-belt, also called a wedge belt. The cogged raw edge construction is suited to drives where a standard wrapped belt may not provide the required grip. Because the profile and length are fixed, the correct replacement must match both values exactly.
If you are unsure whether this is the right belt, send the part number from the old belt, the drive it runs on, and the sheave groove profile to our team by WhatsApp or email. We carry the Movendis line and can help confirm the correct belt or suggest an equivalent based on the data you provide.
Dimensions
- Section
- 3VX
- Length
- 2261mm
Frequently asked questions
- How do I confirm the Movendis PP-3VX890-EPDM-AS matches my old belt?
- Read the marking on the back of the old belt. The profile should be 3VX and the length should be 2261 mm. If the marking is unreadable, measure the outside length and compare the cross-section to a 3VX profile.
- What should I send to request a quote for this belt?
- Send the part number PP-3VX890-EPDM-AS, the profile and length from your old belt, and the drive application details. Our team will confirm the belt or suggest an equivalent.
- Can I use a different profile belt if the length is the same?
- No. The profile and length must both match. A belt with a different profile will not seat correctly in the sheave grooves, even if the length is the same.