V-belt Movendis PP-3VX780-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 3VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-3VX780-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-3VX780-EPDM-AS and any equivalents.
This is a Movendis PowerPlus EPDM Cogged Raw Edge Narrow belt in the 3VX profile, 1981 mm long. Cogged narrow V-belts are common on industrial drives where a compact cross section and flexible operation are needed. Confirm the profile and the length against your own drive before ordering.
Read the marking on the back of the belt you are replacing and compare it to this part number. The 3VX profile and the 1981 mm length are the two figures to match. If the old belt is worn or the marking is gone, measure the outside length of the belt and check the sheave groove width before you compare.
A cogged narrow V-belt of this type is used on drives that run at higher speeds or over smaller pulleys than a wrapped belt allows. Inspect the sheaves for wear, oil or debris, and check that the belt sits correctly in the groove rather than riding on the bottom. On a multi-belt drive, replace the full set so the belts share the load evenly.
Dimensions
- Section
- 3VX
- Length
- 1981mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Match the profile and the length first. The belt is a 3VX profile, 1981 mm long. Check the marking on the belt you are replacing, or measure the belt and the sheave groove if the marking has worn off.
- What should I send to get a quote?
- Send the part number PP-3VX780-EPDM-AS, or the profile and length you need, by WhatsApp or email. If you are unsure of the number, send the marking from the old belt and we will help confirm it.
- Can I replace just one belt on a multi-belt drive?
- On a drive using more than one belt, replace the full set at the same time. Mixing a new belt with worn belts can cause uneven load sharing and faster wear.