V-belt Movendis PP-3VX765-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 3VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-3VX765-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-3VX765-EPDM-AS and any equivalents.
The Movendis PP-3VX765-EPDM-AS is a cogged narrow V-belt in the 3VX profile with a length of 1943 mm. It is built for drives that use a 3VX cross section, where the cogged raw edge design is used in place of a wrapped belt. Use the part number and the marking on the old belt to confirm the match before ordering.
The most reliable way to match this belt is to read the marking on the back of the belt being replaced. Look for the profile and the length, and compare them with the 3VX profile and 1943 mm length of the PP-3VX765-EPDM-AS. If the old belt is worn or the marking is gone, measure the outside length and check the cross section against the 3VX profile.
Because this is a cogged narrow V-belt, it is used on drives that call for a 3VX section. Confirm the belt is not twisted or flipped in the groove and that the pulleys are aligned. If the drive uses more than one belt, replace all belts in the set at the same time so the load is shared evenly.
When you request a quote, send the part number PP-3VX765-EPDM-AS and, if possible, a photo of the marking on the old belt. If the exact belt is not what you need, the team can help confirm the correct belt or suggest an equivalent. We carry the Movendis line and can quote by part number.
Dimensions
- Section
- 3VX
- Length
- 1943mm
Frequently asked questions
- How do I confirm this belt matches the one I am replacing?
- Read the marking on the back of the old belt and compare the profile and length with the 3VX profile and 1943 mm length of this belt. If the marking is not readable, measure the outside length and check the cross section.
- Can I replace just one belt on a multi-belt drive?
- No. On a drive that uses more than one belt, replace all belts in the set at the same time so they share the load evenly.
- What should I send to get a quote?
- Send the part number PP-3VX765-EPDM-AS and, if possible, a photo of the marking on the old belt. The team can confirm the belt or suggest an equivalent.