V-belt Movendis PP-3VX695-EPDM-AS

MOVENDIS PP-3VX695-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-3VX695-EPDM-AS and any equivalents.

The Movendis PP-3VX695-EPDM-AS is a cogged narrow V-belt in the 3VX profile with a length of 1765 mm. The 3VX profile identifies a narrow cross-section, and the 1765 mm length is the datum you match against the old belt or the drive drawing. Use both figures together when confirming the replacement.

Profile and length are the two facts that decide fit. A 3VX belt sits in a narrow-groove pulley, and the X marks a cogged construction with a raw edge. The 1765 mm length is stated in millimeters, so compare it directly with the marking on the belt you are replacing rather than converting it to another unit.

For a quote, send the part number PP-3VX695-EPDM-AS and confirm the profile and length you need. If the belt on the drive carries a different number, read the marking on the back and pass it along; we can check it against this Movendis belt and help confirm the right item or suggest an equivalent.

On a multi-belt drive, replace the full set at the same time so the belts share the load evenly. Inspect the pulleys for wear, alignment and debris before installation, and check the belt tension after the drive has run in. The cogged raw edge construction is intended for drives where a narrow profile is specified.