V-belt Movendis PP-3VX580-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 3VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-3VX580-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-3VX580-EPDM-AS and any equivalents.
The Movendis PP-3VX580-EPDM-AS is a cogged narrow V-belt in the 3VX profile with a 1473 mm length, part of the PowerPlus EPDM Cogged Raw Edge Narrow series. When you are replacing a belt on an existing drive, the marking on the old belt is the fastest way to confirm you are ordering the right one.
Start with the part number printed on the back of the belt you are removing. Compare it against the profile and length on this page: 3VX and 1473 mm. If the old belt is worn, dirty or the marking has rubbed off, measure what you can and send us the drive details instead. A belt that has run for years may have stretched, so the number on it is more reliable than a measurement taken from the used part.
The 3VX profile is a narrow cross-section, and the cogged raw edge construction is common on compact drives where the belt bends over small pulleys. Check the pulleys while the belt is off: look for worn grooves, oil or debris, and confirm the sheave alignment before the new belt goes on. On multi-belt drives, replace every belt in the set at the same time so the load stays evenly shared.
We carry the Movendis PP-3VX580-EPDM-AS and quote it by part number. Send the number, the quantity you need and the drive it runs on by WhatsApp or email, and our team will confirm the belt or suggest an equivalent.
Dimensions
- Section
- 3VX
- Length
- 1473mm
Frequently asked questions
- How do I confirm this is the belt I am replacing?
- Read the part number on the back of the old belt and compare it to the profile and length listed here. If the marking is unreadable, send us the drive details and we will help identify the correct belt.
- What should I include with my quote request?
- Send the part number PP-3VX580-EPDM-AS, the quantity, and any details about the drive or the old belt you are replacing. Photos of the belt marking and the pulleys are useful if the number is unclear.
- Should I replace all the belts on the drive at once?
- On a multi-belt drive, yes. Belts that have run together wear together, and fitting one new belt alongside used ones can leave the new belt carrying more than its share of the load.