V-belt Movendis PP-3VX520-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 3VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-3VX520-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-3VX520-EPDM-AS and any equivalents.
The Movendis PP-3VX520-EPDM-AS is a cogged narrow V-belt in the 3VX profile with a length of 1321 mm. It belongs to the PowerPlus EPDM Cogged Raw Edge Narrow series. This page helps you match it to the belt you are replacing.
When replacing a belt, start by reading the marking on the back of the old belt. Confirm the profile is 3VX and the length is 1321 mm. The PP-3VX520-EPDM-AS matches those two values. If the old belt is worn or the marking is unreadable, measure the outside length and compare it to 1321 mm.
A cogged narrow V-belt like this one is used on drives where a standard wrapped belt may not fit or may run hotter. The raw edge and cogged construction are part of the PowerPlus EPDM series. Check the sheave grooves for wear and alignment before installing a new belt. If you are replacing multiple belts on the same drive, replace them as a set.
To request a quote, send the part number PP-3VX520-EPDM-AS by WhatsApp or email. If you are unsure whether this is the correct belt, send the marking from the old belt and a photo of the drive. The team can confirm the profile and length or suggest an equivalent.
Dimensions
- Section
- 3VX
- Length
- 1321mm
Frequently asked questions
- How do I confirm the Movendis PP-3VX520-EPDM-AS fits my drive?
- Check that the old belt is marked 3VX and has a length of 1321 mm. The PP-3VX520-EPDM-AS is a 3VX profile belt with a length of 1321 mm. If the marking is worn, measure the outside length and compare it to 1321 mm.
- Can I mix this belt with other belts on the same drive?
- For drives with multiple belts, replace all belts at the same time with belts of the same profile and length. Mixing a new belt with worn belts can cause uneven tension and premature wear.
- What information should I send with my quote request?
- Send the part number PP-3VX520-EPDM-AS. If you are unsure about the match, include the marking from the old belt and the drive sheave details. The team will confirm the profile and length or suggest an equivalent.