V-belt Movendis PP-3VX310-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 3VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-3VX310-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-3VX310-EPDM-AS and any equivalents.
The Movendis PP-3VX310-EPDM-AS is a cogged narrow V-belt in the 3VX profile with a length of 787 mm. Cogged narrow V-belts are used on industrial drives where a compact cross-section and good grip on small pulleys are needed, such as pumps, fans, compressors and other plant equipment. This page covers how to confirm that this belt fits your drive before you request a quote.
The 3VX profile is a narrow wedge cross-section, and the cogged raw edge construction is common on drives with small pulley diameters where a standard wrapped belt would run hot or slip. To confirm fit, check the marking on the back of the belt you are replacing: the profile and the length are the two values that must match. This belt is a 3VX profile with a length of 787 mm.
If the old belt marking is worn or unreadable, measure the outside length and compare it to the 787 mm listed here, and confirm the cross-section is 3VX. When a drive uses more than one belt, replace the full set at the same time so the belts share the load evenly. Send the part number PP-3VX310-EPDM-AS, or the marking from your old belt, by WhatsApp or email and our team will confirm it or suggest an equivalent.
Dimensions
- Section
- 3VX
- Length
- 787mm
Frequently asked questions
- How do I confirm the Movendis PP-3VX310-EPDM-AS fits my drive?
- Check the marking on the back of the belt you are replacing. The profile must be 3VX and the length must be 787 mm. If the marking is unreadable, measure the outside length and confirm the cross-section.
- What should I send to request a quote for this belt?
- Send the part number PP-3VX310-EPDM-AS by WhatsApp or email. If you are not sure of the number, send the marking from the old belt or the profile and length, and our team will help confirm the right belt.
- Should I replace all the belts on a multi-belt drive at once?
- Yes. On a drive that uses more than one belt, replacing the full set at the same time keeps the load shared evenly across the belts.