V-belt Movendis PP-3VX260-EPDM-AS
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- 3VX
- Series
- PowerPlus EPDM Cogged Raw Edge Narrow
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-3VX260-EPDM-AS belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-3VX260-EPDM-AS and any equivalents.
The Movendis PP-3VX260-EPDM-AS is a cogged narrow V-belt in the 3VX profile with a 660 mm length. The 3VX profile is the narrow wedge cross-section, so it fits drives designed for 3VX sheaves rather than classic 3L or A-section pulleys. The cogged raw edge construction is suited to compact drives where a standard wrapped belt may not flex as easily.
The two figures that matter most are the profile and the length. The 3VX profile sets the cross-section and the way the belt sits in the groove; the 660 mm length sets the outside circumference. Both must match the drive, so read the marking on the back of the old belt and compare it to this part number before ordering.
Because this is a cogged narrow V-belt, the raw edge and molded cogs are intended for drives with small pulley diameters and higher speed ratios. If the drive runs more than one belt, replace the full set at the same time so the load stays evenly shared across the grooves.
To request a quote, send the part number PP-3VX260-EPDM-AS by WhatsApp or email. If you are unsure whether this is the correct belt, include the old belt marking, the pulley diameters, and the drive arrangement, and the team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- 3VX
- Length
- 660mm
Frequently asked questions
- What does the 3VX profile mean for my drive?
- 3VX is a narrow wedge profile. It is narrower than a classic V-belt section, so it is used on drives with 3VX sheaves. Check that your pulleys are cut for 3VX before ordering.
- How do I confirm the 660 mm length?
- Read the marking on the back of the belt you are replacing. If it shows 3VX and a length close to 660 mm, this belt is the same size. If the marking is worn, measure the outside circumference of the old belt.
- Can you help if I am not sure this is the right belt?
- Yes. Send the old belt marking, the pulley diameters, and a description of the drive by WhatsApp or email. The team will confirm whether PP-3VX260-EPDM-AS fits or suggest an equivalent.