Timing belt Movendis PP-384-8M-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerPlus Curvilinear Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-384-8M-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-384-8M-480 and any equivalents.
The Movendis PP-384-8M-480 is a PowerPlus Curvilinear timing belt with an HTD 8M profile and a 384 mm length. It is used in synchronous drives where the belt teeth mesh with a matching pulley to keep the driven shaft in step with the drive. This page covers where this type of belt fits and how to confirm the part before you order.
Timing belts in the HTD 8M profile are common on industrial drives that need positive motion rather than friction: cam drives, indexing tables, pumps, conveyors and similar equipment. The curvilinear tooth form is made to run in an 8M pulley groove, so the belt and the pulley must match in profile as well as pitch.
To confirm fit, read the marking on the back of the old belt and compare it with PP-384-8M-480. Check the pulley groove profile and count the teeth on both pulleys, then measure the belt length in the same way the original was specified. If the drive runs more than one belt, replace the set together so the load stays even across the strands.
If the marking is worn or the belt is missing, send the machine make and model, the pulley part numbers and the center distance. Our team can compare those details against the part number and help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 384mm
Frequently asked questions
- What does the 384 in PP-384-8M-480 refer to?
- It is the belt length, 384 mm, as listed for this part. The profile is HTD 8M and the pitch is 8 mm.
- Can I use this belt on any 8 mm pitch pulley?
- No. It is made for an HTD 8M profile pulley groove. The pulley profile and the belt profile must match, so check the pulley marking before you install it.
- What should I send to get a quote?
- Send the part number PP-384-8M-480, the quantity and any details from the old belt marking. If you are unsure of the number, include the pulley part numbers and the center distance so we can help confirm the fit.