Timing belt Movendis PP-351-D/S4.5M-180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerPlus Double-Sided Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-351-D/S4.5M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-351-D/S4.5M-180 and any equivalents.
The Movendis PP-351-D/S4.5M-180 is a double-sided timing belt from the PowerPlus Double-Sided Timing Belts series, with a 351 mm length. It is the belt to reach for when a drive needs synchronous power taken from both faces of the belt. This page covers how to match it against the belt you are replacing.
The most reliable match starts with the belt itself. Read the marking printed on the back of the old belt and compare it against PP-351-D/S4.5M-180. A double-sided belt carries teeth on both faces, so confirm that the belt in the drive is in fact double-sided before ordering. If the old belt is worn or the marking has rubbed away, note the profile and the length and send those details with your request.
Length is the second check. This belt is listed at 351 mm, and that figure should line up with what the drive was built for. Do not measure a used belt and treat the result as the specification, since a belt that has been running can read differently from a new one. Where the original number is still legible, quote it exactly as it appears.
When you send your request by WhatsApp or email, include the part number PP-351-D/S4.5M-180, the marking from the old belt, and the equipment or drive it serves. Photos of the belt back and of the pulley arrangement help us confirm the right belt or suggest an equivalent. The team replies promptly and will confirm the match before you commit.
Dimensions
- Length
- 351mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Compare the marking on the back of the belt being replaced with PP-351-D/S4.5M-180, and check that the drive uses a double-sided timing belt. Send us the old marking and the 351 mm length so we can confirm the match.
- What should I send with my quote request?
- Send the part number PP-351-D/S4.5M-180, the marking from the old belt, and details of the drive or equipment it runs on. Photos of the belt and pulleys are useful when the marking is worn.
- Can you help if the original number is no longer readable?
- Yes. Note the profile and the 351 mm length, and describe the drive. We will help confirm the correct belt or suggest an equivalent from what we carry.