Timing belt Movendis PP-3048-D/S8M-180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerPlus Double-Sided Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-3048-D/S8M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-3048-D/S8M-180 and any equivalents.
This Movendis PowerPlus double-sided timing belt carries the part number PP-3048-D/S8M-180 and a length of 3048 mm. It is built for drives that need teeth on both faces to turn opposing pulleys from a single belt run. Use this page to confirm that the belt you are replacing matches this part number and length.
Before you order, find the marking on the back of the belt you are replacing. The part number PP-3048-D/S8M-180 and the 3048 mm length should match what is printed there. If the old belt is worn or the marking is unreadable, measure the length and check the profile against the pulleys before you request a quote.
A double-sided timing belt has teeth on both sides, so it can drive pulleys that rotate in opposite directions. Confirm that your drive is set up for this type and that the 3048 mm length fits the path around the pulleys and any idlers. If you are unsure, send the part number from the old belt and a photo of the drive to our team.
When you request a quote, include the part number PP-3048-D/S8M-180 and the quantity you need. If you are replacing more than one belt on the same drive, note that as well so we can help you confirm the correct part. Our team replies by WhatsApp or email and can help you check the belt or suggest an equivalent.
Dimensions
- Length
- 3048mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Check the part number and length on the back of the belt you are replacing. The number should read PP-3048-D/S8M-180 and the length should be 3048 mm. If the old belt is unreadable, measure the length and compare the profile to the pulleys.
- What does double-sided mean on this belt?
- This belt has teeth on both sides, so it can drive pulleys that turn in opposite directions from one belt. It is a timing belt, also called a synchronous belt. Confirm that your drive uses this type before ordering.
- What should I send to get a quote?
- Send the part number PP-3048-D/S8M-180 and the quantity you need by WhatsApp or email. If you are replacing multiple belts on the same drive, include that information as well. Our team will reply promptly.