Timing belt Movendis PP-2760-5M-450
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerPlus Curvilinear Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-2760-5M-450 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-2760-5M-450 and any equivalents.
The Movendis PP-2760-5M-450 is a PowerPlus Curvilinear timing belt with an HTD 5M profile, a 2760 mm length and a 5 mm pitch. Use these three values to match it to the belt you are replacing before you order.
Start with the marking on the back of the old belt. Confirm the profile reads HTD 5M, then confirm the length is 2760 mm and the pitch is 5 mm. If the marking is worn or unreadable, measure the old belt and compare the profile and length against the values above. The part number PP-2760-5M-450 carries the same profile and length.
When the profile and length match, the replacement follows the same routing and tooth engagement as the belt removed from the drive. Check the pulleys for worn teeth, the flanges for contact marks and the tensioner for correct travel before installing the new belt. If the drive runs more than one belt, replace the set together so the load stays even.
Send the part number PP-2760-5M-450 by WhatsApp or email to request a quote. If you are unsure about the profile or length, send the marking from the old belt and a photo of the drive. We carry Movendis and can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 2760mm
Frequently asked questions
- How do I confirm the PP-2760-5M-450 is the correct belt?
- Read the marking on the back of the belt you are replacing. The profile should be HTD 5M, the length 2760 mm and the pitch 5 mm. If the marking is gone, measure the old belt and compare those values.
- What should I send to request a quote?
- Send the part number PP-2760-5M-450 by WhatsApp or email. If you are unsure of the profile or length, include the marking from the old belt and a photo of the drive.
- Should I replace more than one belt at a time?
- If the drive uses more than one belt, replace the set together. This keeps the load even across the belts and avoids mixing a new belt with worn ones.