Timing belt Movendis PP-2730-14M-430
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerPlus Curvilinear Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-2730-14M-430 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-2730-14M-430 and any equivalents.
The Movendis PP-2730-14M-430 is a timing belt in the PowerPlus Curvilinear series. It uses the HTD 14M profile with a 2730 mm length and a 14 mm pitch. Match these three values to the belt you are replacing before you request a quote.
To confirm the match, read the marking on the back of the old belt. The part number, profile and length should correspond to the PP-2730-14M-430. If the old belt is worn or the marking is unreadable, measure the length and check the tooth profile against the HTD 14M specification.
The profile and pitch determine how the belt seats in the pulleys. The HTD 14M profile has a 14 mm pitch, and the 2730 mm length is the datum length. Any deviation in these values means the belt will not fit or will run incorrectly.
Send the part number, the profile and the length when you request a quote. If you are unsure, include photos of the old belt and the pulley teeth. We carry the Movendis PP-2730-14M-430 and can help confirm it is the right belt for your drive.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 2730mm
Frequently asked questions
- How do I know if the PP-2730-14M-430 is the right belt for my drive?
- Check the marking on the back of your old belt. It should show the same part number, HTD 14M profile and 2730 mm length. If the marking is gone, measure the length and compare the tooth profile.
- What should I send to get a quote for this belt?
- Send the part number PP-2730-14M-430, the profile HTD 14M and the length 2730 mm. If you have photos of the old belt or the drive, include those as well.
- Can you help if the old belt marking is unreadable?
- Yes. Send clear photos of the old belt and the pulleys, and note the profile and length if you can measure them. We will help confirm the correct belt.