Timing belt Movendis PP-2560-8M-450
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerPlus Curvilinear Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-2560-8M-450 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-2560-8M-450 and any equivalents.
The Movendis PP-2560-8M-450 is a PowerPlus Curvilinear timing belt in the HTD 8M profile. It measures 2560 mm in length with an 8 mm pitch. This page is written for the person matching it against the belt already on the drive.
The most reliable way to confirm a replacement is to read the marking on the back of the belt you are removing. If that marking matches the profile and length here, the PP-2560-8M-450 is the belt to quote. Where the old belt is worn, cut, or the marking has rubbed away, measure the drive instead and note the tooth profile and the length.
The HTD 8M profile and the 2560 mm length are the two figures that matter most for fit. Both are stated above exactly as the belt is listed, so you can compare them directly against what came off the drive. If the numbers on your old belt do not line up, send them anyway and our team will review them against this listing.
When you request a quote, send the part number PP-2560-8M-450 along with the marking from the belt being replaced. A photo of the back of the old belt is useful when the print is faint. We carry Movendis PowerPlus Curvilinear timing belts and reply promptly by WhatsApp or email.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 2560mm
Frequently asked questions
- How do I confirm the PP-2560-8M-450 is the right belt?
- Read the marking on the back of the belt you are replacing and compare it with the profile and length listed here. If the old belt is too worn to read, send us the details you have and we will review them.
- What profile and length is this belt?
- It is an HTD 8M profile with a length of 2560 mm and a pitch of 8 mm, as listed for the Movendis PP-2560-8M-450.
- What should I send with my quote request?
- Send the part number PP-2560-8M-450, the marking from the belt being replaced, and a photo of the old belt if the print is hard to read. We will confirm the match and reply by WhatsApp or email.