Timing belt Movendis PP-2450-14M-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerPlus Curvilinear Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-2450-14M-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-2450-14M-480 and any equivalents.
The Movendis PP-2450-14M-480 is a PowerPlus Curvilinear timing belt with an HTD 14M profile, a 2450 mm length and a 14 mm pitch. When you are replacing a belt, start by matching these three values to the belt that came off the drive.
Read the marking on the back of the old belt first. You are looking for the profile and the length, so an HTD 14M profile and a 2450 mm length are the values to compare. Confirm the pitch is 14 mm. If the old belt is worn or the marking is gone, measure the length and check the profile against the pulley grooves before ordering.
A belt with the same profile and length can differ in construction, so use the full part number PP-2450-14M-480 when you request a quote. Send it by WhatsApp or email and the team will confirm it for the drive you are working on. If the belt on the machine carries a different number, send that number and the team can help confirm the right belt or suggest an equivalent.
Inspect the drive while the belt is off. Check the pulleys for wear, alignment and any debris in the grooves, and check the tensioner and idler bearings. A new timing belt on worn or misaligned pulleys will not run correctly. Replace the belt and then set tension according to the drive manufacturer's procedure.
Dimensions
- Profile
- HTD 14M
- Pitch
- 14mm
- Length
- 2450mm
Frequently asked questions
- What do I need to match this belt to the one being replaced?
- Match the profile, the length and the pitch. This belt is HTD 14M, 2450 mm long, with a 14 mm pitch. Compare those values with the marking on the old belt or with the drive specifications.
- What should I send to request a quote?
- Send the part number PP-2450-14M-480 by WhatsApp or email. If you are replacing a belt with a different number, send that number as well and the team can help confirm the right belt or suggest an equivalent.
- Should I inspect anything else while replacing the belt?
- Yes. Check the pulleys for wear, alignment and debris in the grooves, and check the tensioner and idler bearings. Set tension according to the drive manufacturer's procedure after fitting the new belt.