Timing belt Movendis PP-2352-D/8M-180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerPlus Double-Sided Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-2352-D/8M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-2352-D/8M-180 and any equivalents.
The Movendis PP-2352-D/8M-180 is a double-sided timing belt from the PowerPlus Double-Sided Timing Belts series. It measures 2352 mm in length and is built to drive from both faces. Use the part number and length to match the belt you are replacing.
When matching this belt, start with the marking on the old belt. Confirm the part number PP-2352-D/8M-180 and the 2352 mm length. A double-sided timing belt has teeth on both sides, so check that the replacement has the same profile on each face. If the old belt is worn or the marking is unreadable, measure the length and note the tooth profile before ordering.
Because this is a double-sided timing belt, it is often used where two driven components run from opposite sides of the same belt. Inspect both faces for cracked or missing teeth, exposed cord, and glazing. Also check the pulleys for worn teeth or misalignment, since these can shorten belt life. Replacing the belt before failure helps avoid unplanned downtime.
To request a quote, send the part number PP-2352-D/8M-180 and the quantity you need by WhatsApp or email. If you are unsure whether this is the correct belt, include the old belt's marking and the length. The team can confirm the right belt or suggest an equivalent.
Dimensions
- Length
- 2352mm
Frequently asked questions
- How do I confirm this is the correct belt for my drive?
- Check the marking on the belt being replaced for the part number PP-2352-D/8M-180 and the 2352 mm length. Also verify that the old belt is double-sided and that the tooth profile matches on both sides.
- What should I inspect when replacing a double-sided timing belt?
- Inspect both toothed faces for cracks, missing teeth, and exposed cord. Check the pulleys for wear and make sure the drive is aligned. Address any pulley issues before installing a new belt.
- What information do you need to quote this belt?
- Send the part number PP-2352-D/8M-180 and the quantity required. If you are matching an old belt, include its marking and length so the team can confirm the correct replacement.