Timing belt Movendis PP-2296-D/S8M-180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerPlus Double-Sided Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-2296-D/S8M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-2296-D/S8M-180 and any equivalents.
The Movendis PP-2296-D/S8M-180 is a double-sided timing belt from the PowerPlus Double-Sided Timing Belts series, with a length of 2296 mm. It is the belt to reach for when a drive needs teeth on both faces and the original marking reads this number.
The most reliable way to match this belt is to read the marking on the back of the belt you are replacing and compare it character for character with PP-2296-D/S8M-180. Confirm that the belt in hand is a double-sided timing belt and that the length is 2296 mm. A single transposed character is enough to put the wrong belt on the drive.
Where the old marking is worn off or the belt failed before it could be recorded, work from the drive instead. Count the teeth on both faces and check that the belt runs toothed on both sides, then measure the length and compare it with 2296 mm. Note the profile and the width so the replacement can be checked against the same figures.
Send the part number PP-2296-D/S8M-180, or a photo of the old belt marking, through WhatsApp or email and we will confirm the belt against your data. If a detail on your drive does not line up, include it with the request so it can be reviewed before you order.
Dimensions
- Length
- 2296mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the belt being replaced and match it to PP-2296-D/S8M-180. Check that the old belt is a double-sided timing belt and that its length is 2296 mm.
- What if the marking on the old belt is no longer readable?
- Measure the belt length and confirm it is 2296 mm, and verify that the drive runs a double-sided timing belt with teeth on both faces. Send those details with the part number and we will check them against the belt.
- What should I send to request a quote?
- Send the part number PP-2296-D/S8M-180 by WhatsApp or email, along with the belt marking or a photo of it if you have one. Any drive details that do not match can be included so they can be reviewed.