Timing belt Movendis PP-1980-D/3M-180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerPlus Double-Sided Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-1980-D/3M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-1980-D/3M-180 and any equivalents.
This Movendis PowerPlus double-sided timing belt carries the part number PP-1980-D/3M-180 and a length of 1980 mm. The double-sided construction means teeth on both faces, so it can drive from either side in a reversing or multi-pulley layout.
The 1980 mm length is the datum to match first. Measure the old belt's length the same way and compare it to this figure before you go further. A belt that is even slightly off will not tension correctly or will sit wrong in the pulleys.
The profile is a double-sided timing belt. That tells you the belt is built for synchronous drives where both faces engage toothed pulleys. If your drive uses a single-sided belt, this is not the replacement. If it uses a double-sided belt, the profile and the 1980 mm length are the two numbers that decide fit.
When you request a quote, send the part number PP-1980-D/3M-180 and, if you have it, the marking from the back of the old belt. We carry the Movendis PowerPlus line and can confirm the belt against your drive details.
Dimensions
- Length
- 1980mm
Frequently asked questions
- What does the 1980 mm length refer to?
- It is the belt length as listed for the PP-1980-D/3M-180. Match it to the length of the belt you are replacing, measured the same way.
- How do I know if I need a double-sided timing belt?
- Look at the old belt. If it has teeth on both faces, the drive is set up for a double-sided belt. If it has teeth on one face only, this is not the correct profile.
- What should I send with my quote request?
- Send the part number PP-1980-D/3M-180 and the marking from the back of the old belt if it is readable. That lets us confirm the belt against your drive.