Timing belt Movendis PP-1760-D/5M-180

MOVENDIS PP-1760-D/5M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-1760-D/5M-180 and any equivalents.

The Movendis PP-1760-D/5M-180 is a double-sided timing belt from the PowerPlus series, built for drives that need synchronous power taken from both faces of the belt. It measures 1760 mm in length. Before you fit it, spend a few minutes on the drive itself.

A double-sided timing belt only runs true if the sheaves and the rest of the drive are in condition. Check both rows of teeth on every sprocket for wear, hooked or rolled tooth profiles, and damage from debris or a previous belt failure. Confirm the sprockets are aligned with each other and seated correctly on their shafts, and that no bearing play lets a shaft move under load. Look at the idlers and tensioners as well, since a rough or seized idler will shorten the life of any new belt.

Inspect the belt path for anything that rubs: guards, brackets, hoses and accumulated material. Clean the teeth of the sprockets before the new belt goes on, and keep grease and oil away from the belt faces. On a double-sided drive, the belt is normally tensioned by moving one or more of the driven components, so check that the adjustment range is still usable before you start.

When you are ready to order, send the part number PP-1760-D/5M-180 by WhatsApp or email along with the quantity you need. If you are replacing a belt that has lost its marking, include the drive details and a photo of the old belt, and the team can help confirm the right belt or suggest an equivalent.