Timing belt Movendis PP-1720-8M-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerPlus Curvilinear Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-1720-8M-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-1720-8M-480 and any equivalents.
The Movendis PP-1720-8M-480 is a PowerPlus Curvilinear timing belt with an HTD 8M profile and a 1720 mm length. It is the belt to reference when replacing a worn synchronous belt on an 8M pitch drive. We supply this belt to maintenance, engineering and purchasing teams across the United States, Canada, Mexico and South America.
The most reliable way to match this belt is to read the marking on the back of the belt you are removing. Confirm the profile is HTD 8M, the length is 1720 mm and the pitch is 8 mm. If the old belt is worn or the marking is gone, measure the length and count the teeth before ordering; the part number PP-1720-8M-480 identifies this exact profile and length combination.
When you request a quote, send the part number PP-1720-8M-480, the profile HTD 8M and the length 1720 mm. If you are unsure whether this is the correct belt for your drive, send a photo of the old belt marking and the drive arrangement. Our team can confirm the belt or suggest an equivalent.
This is a timing belt, also called a synchronous belt, so it must match the pulley grooves and the drive length exactly. Do not substitute a different profile or length. If the drive runs more than one belt, replace the set at the same time and inspect the pulleys for wear.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 1720mm
Frequently asked questions
- How do I confirm the Movendis PP-1720-8M-480 is the belt I need?
- Check the marking on the back of the belt you are replacing. It should show the profile HTD 8M and the length 1720 mm. The part number PP-1720-8M-480 matches that profile and length. If the marking is unreadable, measure the belt length and count the teeth, then send those details with your quote request.
- What information should I send with my quote request?
- Send the part number PP-1720-8M-480, the profile HTD 8M and the length 1720 mm. If you have the old belt, include a photo of the back marking. If you are matching a drive, include the pulley tooth count and the center distance so we can confirm the belt or suggest an equivalent.
- Can I replace just one belt on a multi-belt drive?
- For timing belts, replace the full set at the same time so the drive runs evenly. Mixing a new belt with worn belts can change the timing. Inspect the pulleys for wear or damage before installing the new belt.