Timing belt Movendis PP-1560-5M-450
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerPlus Curvilinear Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-1560-5M-450 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-1560-5M-450 and any equivalents.
This Movendis PowerPlus Curvilinear timing belt is identified by the code PP-1560-5M-450. It uses an HTD 5M profile with a 1560 mm length and a 5 mm pitch. Timing belts in this profile are used on synchronous drives where the belt teeth mesh with matching pulleys to maintain position and speed.
To confirm fit, compare the marking on the back of your existing belt with the code PP-1560-5M-450. Check that the profile is HTD 5M, the length is 1560 mm and the pitch is 5 mm. If the old belt is worn or the marking is unreadable, count the teeth and measure the length before requesting a quote.
Timing belts in this size range are common on industrial equipment such as packaging lines, conveyors, and small machinery drives. Because the belt runs on toothed pulleys, the profile and pitch must match the pulley grooves. A belt with the same length but a different profile will not seat correctly.
When you send your request, include the part number PP-1560-5M-450 and the quantity you need. If you are replacing a belt on a drive with multiple belts, note that timing belts are typically replaced as a set. Our team can help confirm the right belt or suggest an equivalent from the Movendis PowerPlus Curvilinear line.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 1560mm
Frequently asked questions
- How do I confirm that the Movendis PP-1560-5M-450 is the correct belt for my drive?
- Check the marking on the back of your existing belt. It should read PP-1560-5M-450 or show the same profile and length. Also verify that the pulleys are HTD 5M and the center distance allows a 1560 mm belt.
- What should I send to get a quote for this belt?
- Send the part number PP-1560-5M-450 and the quantity you need via WhatsApp or email. If you are unsure about the part number, include a photo of the old belt marking and the pulley profile.
- Can I use a different brand belt with the same size?
- If the profile, length and pitch match, a belt from another brand may fit. However, always confirm that the pulley grooves are compatible. Our team can help you compare specifications.