Timing belt Movendis PP-1552-8M-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerPlus Curvilinear Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-1552-8M-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-1552-8M-480 and any equivalents.
The Movendis PP-1552-8M-480 is a PowerPlus Curvilinear timing belt with an HTD 8M profile. The part number identifies a belt of 1552 mm length running on an 8 mm pitch. Read the profile and length together before you order, because those two values decide whether the belt sits correctly on the pulleys.
Profile and length are the first check on any synchronous drive. HTD 8M describes the tooth form and the pitch; 1552 mm is the length. A belt with the wrong profile will not seat in the pulley grooves, and a belt with the wrong length will not let you set the correct tension. Confirm both against the marking on the old belt or the drive documentation.
The PowerPlus Curvilinear series is built for timing drives where the belt teeth mesh with pulley grooves to keep the shafts in step. When you send your request, include the part number PP-1552-8M-480, the profile HTD 8M, and the length 1552 mm. If you are replacing a belt on a drive that runs more than one belt, note how many the drive takes so the set can be matched.
We carry the Movendis line and quote by part number through WhatsApp or email. Send the belt marking or the part number and the team will confirm the right belt or suggest an equivalent. Inspect the pulleys and the tensioner at the same time, since worn grooves or a weak tensioner will shorten the life of any new timing belt.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 1552mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The HTD 8M profile gives the tooth shape and the 8 mm pitch; the 1552 mm length gives the belt length. Both must match the drive before the belt will run correctly.
- How do I request a quote for the PP-1552-8M-480?
- Send the part number PP-1552-8M-480 by WhatsApp or email. If you have the old belt, include a photo of the marking so the profile and length can be confirmed.
- Should I replace more than one belt at a time?
- If the drive uses multiple belts, replace them as a set so the load is shared evenly. Tell us how many the drive takes when you request the quote.