Timing belt Movendis PP-1505-5M-450
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerPlus Curvilinear Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-1505-5M-450 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-1505-5M-450 and any equivalents.
The Movendis PP-1505-5M-450 is a timing belt in the PowerPlus Curvilinear series. It uses an HTD 5M profile with a 1505 mm length and 5 mm pitch. This page helps you match it to the belt you are replacing.
Start by reading the marking on the back of the old belt. Confirm the profile is HTD 5M and the length is 1505 mm. The 5 mm pitch is the distance between tooth centers. If those three values match, the PP-1505-5M-450 is the correct size.
If the marking is worn or missing, measure the old belt. Count the teeth and check the width. Then compare the profile and length to the data above. A belt with a different profile or length will not fit the same pulleys.
When you request a quote, send the part number PP-1505-5M-450 and the quantity you need. If you are unsure, send the old belt marking or a photo. Our team can confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 5M
- Pitch
- 5mm
- Length
- 1505mm
Frequently asked questions
- How do I confirm the PP-1505-5M-450 matches my old belt?
- Check the old belt marking for HTD 5M profile and 1505 mm length. Also confirm the 5 mm pitch. If those match, the PP-1505-5M-450 is the correct size.
- What should I send to get a quote?
- Send the part number PP-1505-5M-450 and the quantity. If you are unsure, include the old belt marking or a photo. We will confirm the right belt or suggest an equivalent.
- Can I use a belt with a different profile or length?
- No. The profile and length must match the drive. The PP-1505-5M-450 has an HTD 5M profile and 1505 mm length. A different profile or length will not fit the same pulleys.