Timing belt Movendis PP-1480-8M-540
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerPlus Curvilinear Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-1480-8M-540 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-1480-8M-540 and any equivalents.
This Movendis PP-1480-8M-540 is a timing belt from the PowerPlus Curvilinear series. The part number tells you the two dimensions that matter most when selecting a synchronous belt: the profile and the length.
The code breaks down into an HTD 8M profile and a 1480 mm length. Pitch is 8 mm. Those three figures are what you match against the pulley grooves and the drive layout before anything else. If the old belt is still on the machine, read the marking on its back and compare it with these values.
The 8M profile is a curvilinear tooth form used in HTD drives. With an 8 mm pitch and a 1480 mm length, this belt suits a drive whose pulleys are cut for that profile and whose center distance and pulley diameters add up to that length. Confirm the profile and length from the belt you are replacing, not from the machine model alone.
If you are unsure whether this is the correct belt, send the part number you have, the profile and length from the old belt, and the pulley tooth count. We carry Movendis and can help confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 1480mm
Frequently asked questions
- What do the profile and length mean on this belt?
- The belt is HTD 8M profile with a 1480 mm length and an 8 mm pitch. The profile must match the pulley grooves, and the length must match the drive's required belt length.
- How do I confirm this is the belt I need?
- Check the marking on the back of the old belt for the profile and length, and compare them with HTD 8M and 1480 mm. Also verify the pulley tooth count and pitch.
- What should I send for a quote?
- Send the part number PP-1480-8M-540, or the profile and length from your old belt, along with the pulley tooth count. We will confirm the belt or suggest an equivalent.