Timing belt Movendis PP-1400-S14M-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerPlus Curvilinear Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-1400-S14M-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-1400-S14M-480 and any equivalents.
The Movendis PP-1400-S14M-480 is a timing belt from the PowerPlus Curvilinear series. It has an STD profile and a length of 1400 mm. Before you fit it, inspect the drive and sheaves so the new belt runs true from the first start.
Check the sheaves for worn grooves, burrs, or debris that can cut the belt edge or cause it to track off-center. Confirm the sheave teeth are clean and free of buildup, and verify that the shafts and bearings turn freely. Misalignment between sheaves will shorten belt life even when the replacement is correct.
Match the old belt to the new one by reading the marking on the back. The PP-1400-S14M-480 carries the PowerPlus Curvilinear series identification, an STD profile, and a 1400 mm length. If the old belt is worn or the marking is unreadable, measure the length and note the profile before ordering.
When you request a quote, send the part number PP-1400-S14M-480 and the quantity you need. If you are unsure whether this belt fits your drive, include the old belt marking and the sheave details. The team can confirm the right belt or suggest an equivalent.
Dimensions
- Profile
- STD
- Length
- 1400mm
Frequently asked questions
- What should I check on the drive before installing this belt?
- Inspect the sheaves for wear, burrs, and debris. Confirm the sheave teeth are clean, the shafts turn freely, and the sheaves are aligned. Correct any issues before fitting the new belt.
- How do I identify the belt I need to replace?
- Read the marking on the back of the old belt. The replacement should match the profile and length. This belt has an STD profile and a 1400 mm length.
- What information should I send with my quote request?
- Send the part number PP-1400-S14M-480 and the quantity. If you are unsure about the fit, include the old belt marking and sheave details so the team can confirm or suggest an equivalent.