Timing belt Movendis PP-1264-D/8M-180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerPlus Double-Sided Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-1264-D/8M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-1264-D/8M-180 and any equivalents.
The Movendis PP-1264-D/8M-180 is a double-sided timing belt from the PowerPlus Double-Sided Timing Belts series, with a length of 1264 mm. It drives from both faces, so it suits layouts where pulleys engage the top and bottom of the same belt. Before you fit it, inspect the drive it runs on.
Start with the sheaves. Check every tooth profile for wear, chipping or packed debris, and look for grooves worn into the flanges. A worn sheave will wear a new belt quickly, so any damaged pulley should be addressed before the belt goes on.
Next, check alignment and tension. Confirm the shafts are parallel and the pulleys sit in line, then verify the idler or tensioner turns freely and is not seized. Belt tension should be set to the drive manufacturer's specification for the application, not guessed from feel.
Finally, read the marking on the belt you are replacing and match it to this part number. The PP-1264-D/8M-180 carries a 1264 mm length, which is the figure to confirm against the old belt. Send the part number and any photos of the marking to our team by WhatsApp or email and we will confirm the right belt or suggest an equivalent.
Dimensions
- Length
- 1264mm
Frequently asked questions
- How do I confirm this is the correct belt for my drive?
- Read the part number and length marking on the back of the belt you are removing. If it matches PP-1264-D/8M-180 and 1264 mm, this is the same belt. If the marking is worn off, send us photos of the belt and the drive and we will help identify it.
- What should I check on the drive before installing a new belt?
- Inspect the sheave teeth for wear or damage, confirm the shafts are parallel and the pulleys are aligned, and check that the tensioner or idler spins freely. Worn or misaligned components will shorten the life of any new belt.
- How do I request a quote for this belt?
- Send the part number PP-1264-D/8M-180 to our team by WhatsApp or email. If you need help confirming the right belt or an equivalent, include the machine details and photos of the old belt marking.