Timing belt Movendis PP-1256-8M-480
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerPlus Curvilinear Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-1256-8M-480 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-1256-8M-480 and any equivalents.
The Movendis PP-1256-8M-480 is a timing belt from the PowerPlus Curvilinear line, built to an HTD 8M profile with a 1256 mm length and an 8 mm pitch. If you are replacing a belt on an existing drive, this page gives you the numbers to check before you order.
The simplest way to match this belt is to read the marking on the back of the belt you are removing. Compare the profile and the length against the HTD 8M profile and 1256 mm length listed here, along with the 8 mm pitch. If the old belt is worn or the marking is no longer legible, measure the drive instead: count the teeth on both pulleys, confirm the belt width and tooth profile, and note the center distance so the length can be verified.
A timing belt wears at the teeth and along the cords, so a belt that still looks intact may already have changed pitch. On drives where more than one belt runs in parallel, replace the set together so the load stays evenly shared. Check the pulleys at the same time for tooth wear, debris in the grooves and correct alignment, since any of these will shorten the life of a new belt.
Once you have confirmed the profile and length, send the part number PP-1256-8M-480 to our team by WhatsApp or email. If the exact belt is not the right fit for your drive, we can help confirm the correct belt or suggest an equivalent based on the details you provide.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 1256mm
Frequently asked questions
- How do I confirm the Movendis PP-1256-8M-480 is the belt I need?
- Check the marking on the belt you are replacing for an HTD 8M profile and a 1256 mm length, then compare it with the profile, length and 8 mm pitch listed for this belt. If the marking is unreadable, measure the drive and send us the pulley and center distance details.
- What information should I send with my quote request?
- Send the part number PP-1256-8M-480, the quantity you need, and any drive details you have, such as the pulley tooth counts, belt width and center distance. Photos of the old belt marking also help us confirm the match.
- Can you help if this belt does not match my drive?
- Yes. Send the profile, length and pitch you need along with your application details, and our team can help confirm the right belt or suggest an equivalent.