Timing belt Movendis PP-1192-D/8M-180
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerPlus Double-Sided Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-1192-D/8M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-1192-D/8M-180 and any equivalents.
This Movendis PowerPlus double-sided timing belt carries the part number PP-1192-D/8M-180 and measures 1192 mm in length. Double-sided timing belts are used in drives that need synchronous power transmission from both faces of the belt. To confirm fit, match the part number and the 1192 mm length to the belt you are replacing.
Double-sided timing belts are common on reversing drives, dual-output shafts, and serpentine layouts where two pulleys are driven from opposite sides of the same belt. The teeth on both faces maintain timing without slip. Because the belt is specified by profile and length, the existing marking on the back of the belt is the fastest way to identify the correct replacement.
Read the full part number from the old belt and compare it to PP-1192-D/8M-180. Confirm the 1192 mm length matches the original. Inspect the pulleys for worn teeth, debris, or misalignment before installation, since these conditions shorten belt life. If the marking is worn or unreadable, measure the belt length and note the tooth profile from the pulleys.
Send the part number, the 1192 mm length, and a photo of the old belt marking to our team by WhatsApp or email. We carry Movendis belts and will confirm the correct double-sided timing belt for your drive. If you are replacing more than one belt on the same drive, include all part numbers in your request.
Dimensions
- Length
- 1192mm
Frequently asked questions
- How do I confirm that PP-1192-D/8M-180 is the right belt for my drive?
- Check the part number printed on the back of the existing belt and confirm the 1192 mm length matches. Also verify the tooth profile against the pulleys. If the marking is unreadable, send a photo and the measured length to our team.
- What information should I send to request a quote?
- Send the part number PP-1192-D/8M-180, the 1192 mm length, and the quantity you need. A photo of the old belt marking helps us confirm the correct item.
- Can I replace just one belt on a drive that uses two?
- On drives with multiple belts, replacing them as a set helps maintain even tension and wear. Include all part numbers from the drive in your request so we can confirm each belt.