Timing belt Movendis PP-1152-D/S8M-180

MOVENDIS PP-1152-D/S8M-180 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-1152-D/S8M-180 and any equivalents.

The Movendis PP-1152-D/S8M-180 is a double-sided timing belt from the PowerPlus Double-Sided Timing Belts series. Its profile and 1152 mm length are the two specifications that determine fit and function in your drive.

A double-sided timing belt carries teeth on both faces, so it can drive loads from either side of the belt in a single run. That construction suits drives where two shafts must turn in opposite directions or where space limits the number of components. The profile defines the tooth geometry that must match your pulleys, and the 1152 mm length sets the center distance and wrap around those pulleys. Both values must agree with the original belt before you install a replacement.

When you request a quote, include the part number PP-1152-D/S8M-180 and confirm the profile and 1152 mm length against the belt you are replacing. If the marking on the back of the old belt is worn or unreadable, send photos of the belt and the drive, or measure the length and count the teeth. Our team can help confirm the right belt or suggest an equivalent based on the full marking.

Replacing a double-sided timing belt is also a good time to inspect the pulleys for worn teeth, check the tensioner and idler for smooth operation, and verify alignment between the two shafts. Any of these can shorten belt life. If the drive uses more than one belt, replace them as a set so the load stays evenly distributed.