Timing belt Movendis PP-1144-8M-370
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- Timing belts
- Series
- PowerPlus Curvilinear Timing Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS PP-1144-8M-370 belongs to timing belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for PP-1144-8M-370 and any equivalents.
The Movendis PP-1144-8M-370 is a timing belt in the PowerPlus Curvilinear series. Its profile is HTD 8M, its length is 1144 mm, and its pitch is 8 mm. This page is written for maintenance and purchasing teams that need to match this belt to the one being replaced.
Start with the belt you are taking off. Read the marking on the back and confirm the profile and the length. The replacement must carry the same HTD 8M profile and the same 1144 mm length. The 8 mm pitch is part of that profile and must match as well. If the old belt is worn or the marking is unreadable, measure the length and check the profile against the pulley grooves before ordering.
When you request a quote, send the full part number PP-1144-8M-370 along with the profile and length you found on the old belt. A photo of the back marking helps us confirm you are looking at the right item. If the belt is part of a set, include the quantity of belts on the drive so we can quote the full set.
We carry the Movendis PowerPlus Curvilinear line and can help you confirm this belt or suggest an equivalent if the exact item is not what your drive needs. Send the part number by WhatsApp or email and the team will reply promptly.
Dimensions
- Profile
- HTD 8M
- Pitch
- 8mm
- Length
- 1144mm
Frequently asked questions
- How do I confirm this is the right belt for my drive?
- Match the profile, length, and pitch on the old belt to the HTD 8M profile, 1144 mm length, and 8 mm pitch of the PP-1144-8M-370. The marking on the back of the old belt is the best starting point.
- What should I send with my quote request?
- Send the part number PP-1144-8M-370, the profile and length from the old belt, and the quantity you need. A photo of the back marking is helpful if the belt is worn.
- Can you help if the marking on my old belt is unreadable?
- Yes. Send the profile and length you measured, plus the part number you believe is correct. We will help confirm the HTD 8M profile and 1144 mm length match before you order.