V-belt Movendis P-Z64
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- Z
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-Z64 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-Z64 and any equivalents.
The Movendis P-Z64 is a classical wrapped V-belt with a Z profile and a length of 1626 mm. It is used in general industrial drives where a standard classical cross-section is required. Confirm fit by checking the profile and length against your existing belt.
Classical wrapped V-belts like the P-Z64 are common on light-duty drives such as small fans, pumps, and compressors. The wrapped construction helps resist oil and heat in normal industrial environments. The Z profile is a narrow cross-section, so verify that your sheave groove matches this profile before ordering.
To confirm the P-Z64 is the correct replacement, read the marking on the back of your old belt. The profile and length should match Z and 1626 mm. If the old belt is worn or the marking is unreadable, measure the outside length and compare it to 1626 mm. Send the part number and any photos of the drive to our team for a quote.
Dimensions
- Section
- Z
- Length
- 1626mm
Frequently asked questions
- What does the Z profile mean on this belt?
- Z is the cross-section profile of this classical V-belt. It determines the width and height of the belt, so it must match the groove of your sheave. The P-Z64 has a Z profile and a length of 1626 mm.
- How do I confirm the P-Z64 will fit my drive?
- Check the marking on your existing belt for the profile and length. If it reads Z and 1626 mm, the P-Z64 is the same size. You can also measure the outside length of the old belt and compare it to 1626 mm.
- Can you help me identify the right belt if I don't have the part number?
- Yes. Send us photos of the old belt, including any markings on the back, and the drive setup. Our team will review the profile and length and suggest the correct belt for your application.