V-belt Movendis P-Z42
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- Z
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-Z42 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-Z42 and any equivalents.
The Movendis P-Z42 is a classical V-belt in the Z profile with a 1067 mm length. This page covers what those two values tell you when you are selecting a replacement or specifying a new drive.
The profile sets the cross-section, so a Z profile belt fits the pulley groove it was designed for. The length is given as 1067 mm. Confirm both against the belt you are replacing or against the drive specification before you order.
The P-Z42 is a wrapped classical V-belt from the Movendis Classical Wrapped V-Belts series. Wrapped construction is common on general industrial drives where the belt runs over standard V-groove pulleys.
When you request a quote, send the part number P-Z42, the profile Z and the 1067 mm length. If you are unsure whether this is the right belt, send a photo of the marking on the back of the old belt and the pulley dimensions, and we can help confirm it.
Dimensions
- Section
- Z
- Length
- 1067mm
Frequently asked questions
- What do the profile and length mean on the P-Z42?
- The Z profile is the belt cross-section, which determines the pulley groove it fits. The length is 1067 mm. Both must match the drive.
- How do I confirm the P-Z42 is the correct replacement?
- Read the marking on the back of the belt you are replacing. If it shows Z and 1067 mm, the P-Z42 matches those two values. You can also send us the old part number and pulley dimensions.
- What should I send to request a quote?
- Send the part number P-Z42, the profile Z and the length 1067 mm. If you have the old belt, a photo of the back marking helps us confirm the match.