V-belt Movendis P-Z39
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- Z
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-Z39 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-Z39 and any equivalents.
The Movendis P-Z39 is a classical V-belt with a Z profile and a 990 mm length. It is used in light-duty drives on industrial machinery and equipment.
Classical V-belts like this one are common on drives where a simple, single belt transmits power between two pulleys. The Z profile is a relatively narrow cross-section, so it is often found on smaller pulleys and lower-power drives. Confirm that your drive uses a Z profile belt and that the 990 mm length matches the old belt before ordering.
The easiest way to confirm fit is to read the marking on the back of the belt you are replacing. If it shows a Z profile and a 990 mm length, the Movendis P-Z39 is the correct size. Also check the pulley grooves for wear and make sure the belt sits correctly in the groove without bottoming out.
When you request a quote, send the part number P-Z39 and the quantity you need. If you are unsure about the profile or length, include a photo of the old belt marking and the pulley dimensions. Our team can help confirm the right belt for your drive.
Dimensions
- Section
- Z
- Length
- 990mm
Frequently asked questions
- How do I confirm that the Movendis P-Z39 fits my drive?
- Check the marking on the back of your old belt. It should show a Z profile and a 990 mm length. You can also measure the top width and the outside length of the old belt to compare.
- What should I send to request a quote for this belt?
- Send the part number P-Z39 and the quantity you need by WhatsApp or email. If you want us to confirm the fit, include a photo of the old belt marking and the pulley dimensions.
- Can I replace just one belt on a multi-belt drive?
- On drives that use multiple belts, it is common practice to replace all belts in the set at the same time. This helps keep the load evenly distributed across the belts.