Skip to main content
All products
Movendis logo · MOVENDIS P-Z38
V-belt Movendis P-Z38

MOVENDISBrand We Carry

V-belt Movendis P-Z38

Manufacturer part numberP-Z38Also known as: PZ38 · P Z38
Subcategory
V-belts
Section
Z
Series
Classical Wrapped V-Belts
Get a quote for P-Z38 on WhatsApp

We reply promptly.

Tell us the quantity you need and request a quote by WhatsApp or email.

Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.

Ask on WhatsAppAsk by email

Description

MOVENDIS P-Z38 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-Z38 and any equivalents.

The Movendis P-Z38 is a classical wrapped V-belt with a Z profile and a length of 965 mm. Before you fit it, inspect the drive so the new belt runs true and lasts.

Check the sheaves for wear, rust, or oil. A worn groove lets the belt sit too deep, so it slips and overheats. Clean the grooves and confirm the sheaves are aligned. Turn the drive by hand to feel for rough bearings or a bent shaft.

Measure the old belt and compare it with the P-Z38. Look for cracks, glazing, or missing cover. If one belt in a set is worn, replace the full set so the load stays even. Tension the new belt to the drive maker's spec, then recheck after the first run-in.

The P-Z38 is a classical wrapped V-belt from Movendis. We carry it for maintenance, engineering, and purchasing teams. Send the part number by WhatsApp or email for a quote.

Dimensions

Section
Z
Length
965mm

Frequently asked questions

What should I check on the drive before fitting the P-Z38?
Inspect the sheaves for wear, rust, or oil, and confirm they are aligned. Turn the drive by hand to check bearings and the shaft. Worn grooves or misalignment will shorten belt life.
How do I confirm the P-Z38 is the right belt?
Read the marking on the old belt and measure its length. The P-Z38 is a Z profile belt with a length of 965 mm. If the marking matches, it is the correct size.
What information do you need for a quote?
Send the part number P-Z38 and the quantity you need. You can reach us by WhatsApp or email, and we will reply promptly.
Get a quote for P-Z38 on WhatsApp
Quote on WhatsApp