V-belt Movendis P-Z19.5
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- Z
- Series
- Classical Wrapped V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-Z19.5 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-Z19.5 and any equivalents.
The Movendis P-Z19.5 is a classical wrapped V-belt with a Z profile and a length of 495 mm. When a drive belt needs replacing, the marking on the back of the old belt is the most reliable starting point. This page helps you confirm that the P-Z19.5 matches your application.
Reading the old belt's marking is straightforward. Look for the part number, profile and length printed on the back. The P-Z19.5 indicates a Z profile and a 495 mm length. If the marking is worn or unreadable, measure the outside length and compare it to the 495 mm specification. A belt that is too long or too short will not tension correctly and can slip or damage the drive.
The P-Z19.5 is a classical wrapped V-belt, not a narrow wedge belt or a cogged belt. Classical wrapped construction is common in older drives and general industrial power transmission. The Z profile is a relatively small cross-section, often found on light-duty drives. Confirm that your pulley groove is compatible with a Z profile belt before ordering.
To request a quote, send the part number P-Z19.5 by WhatsApp or email. If you have the old belt, include a photo of the marking and any measurements you can take. The team can help confirm the right belt or suggest an equivalent based on the profile and length.
Dimensions
- Section
- Z
- Length
- 495mm
Frequently asked questions
- How do I confirm the P-Z19.5 is the right belt for my drive?
- Check the marking on the back of your old belt. If it reads P-Z19.5, that is the direct match. If the marking is unreadable, measure the outside length and compare it to 495 mm, and verify that the pulley groove accepts a Z profile.
- What should I send to get a quote for the P-Z19.5?
- Send the part number P-Z19.5 by WhatsApp or email. If you have the old belt, a photo of the marking and the measured length can help confirm the match.
- Is the P-Z19.5 a cogged or narrow wedge belt?
- No. The P-Z19.5 is a classical wrapped V-belt with a Z profile. It is not a cogged belt or a narrow wedge belt.