V-belt Movendis P-SPZ950
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPZ950 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPZ950 and any equivalents.
The Movendis P-SPZ950 is a narrow wedge V-belt in the SPZ profile with a 950 mm length. We carry it for industrial drive service. To confirm the right belt, start with the marking on the old belt.
Read the back of the old belt. The marking gives you the profile and the length, and that is what identifies this belt: SPZ profile, 950 mm length. The same belt is also built to a 9.7 mm top width, 8 mm height and 40 degree angle. Match all of that against the marking before you order.
If the marking is worn or unreadable, note the drive instead. Count the grooves, measure the pulley diameters and the center distance, and photograph the old belt and the nameplate. Send the part number P-SPZ950, or those details, by WhatsApp or email and the team will confirm the belt or suggest an equivalent.
Replace belts on a drive as a set. Mixing a new belt with worn ones changes how the load is shared across the grooves. Inspect the pulleys for wear and alignment at the same time, and keep the old belt until the new one is running correctly.
Dimensions
- Section
- SPZ
- Length
- 950mm
Frequently asked questions
- How do I confirm this is the belt on my drive?
- Read the marking on the back of the old belt. You are looking for the SPZ profile and the 950 mm length. The belt is also 9.7 mm at the top, 8 mm high and cut at 40 degrees. If the marking matches, this is the belt.
- What should I send for a quote?
- Send the part number P-SPZ950 by WhatsApp or email. If you are not sure of the number, send the marking from the old belt plus a photo of the drive and the nameplate. The team will reply and can help confirm the right belt or suggest an equivalent.
- Should I replace more than one belt at a time?
- Yes. On a multi-belt drive, replace the belts as a set so they share the load evenly. Check the pulleys for wear and alignment while the drive is open, and keep the old belt until the new set is running correctly.