V-belt Movendis P-SPZ637
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPZ637 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPZ637 and any equivalents.
The Movendis P-SPZ637 is a narrow wedge V-belt with an SPZ profile and a 637 mm length. It measures 9.7 mm across the top, 8 mm in height and has a 40-degree angle. When you need a replacement, start by reading the marking on the back of the old belt.
The marking on the back of the old belt tells you the profile and the length. On this belt, the marking identifies an SPZ profile and a 637 mm length. The top width is 9.7 mm, the height is 8 mm and the angle is 40 degrees. Compare those figures with the belt you are replacing before you request a quote.
A narrow wedge V-belt like this one is used in drives where the sheave groove matches the SPZ profile and the 637 mm length. Check the sheave groove for wear and confirm that the belt sits correctly in the groove. If the old belt is worn, cracked or glazed, replace it and inspect the drive for alignment and tension.
To request a quote, send the part number P-SPZ637 by WhatsApp or email. If you are unsure about the profile or length, send a photo of the marking on the back of the old belt. The team can help confirm the right belt or suggest an equivalent.
Dimensions
- Section
- SPZ
- Length
- 637mm
Frequently asked questions
- How do I read the marking on the back of the old belt?
- The marking shows the profile and the length. On this belt, the marking identifies an SPZ profile and a 637 mm length. Use those figures to match the replacement.
- What are the dimensions of the Movendis P-SPZ637?
- It has an SPZ profile, a 637 mm length, a 9.7 mm top width, an 8 mm height and a 40-degree angle.
- What should I send to request a quote?
- Send the part number P-SPZ637 by WhatsApp or email. If you are unsure, include a photo of the marking on the back of the old belt.