V-belt Movendis P-SPZ487
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPZ487 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPZ487 and any equivalents.
The Movendis P-SPZ487 is a narrow wedge V-belt in the SPZ profile with a 487 mm length. It is used in industrial drives where a compact cross-section and high power density are required. Confirm fit by matching the profile and length to the belt you are replacing.
This belt has a 9.7 mm top width, 8 mm height and a 40° angle. The SPZ profile is a narrow wedge cross-section, so it fits pulleys machined for SPZ grooves. Check the old belt marking for SPZ and 487 to confirm the replacement matches the drive.
Narrow wedge V-belts are common on pumps, fans, compressors and other industrial machinery. When a belt fails, inspect the pulleys for wear, alignment and groove condition before installing a new belt. If the drive uses multiple belts, replace them as a set to keep load sharing even.
To request a quote, send the part number P-SPZ487 by WhatsApp or email. If you are unsure of the profile or length, send a photo of the belt marking and the pulley grooves. The team can confirm the correct belt or suggest an equivalent.
Dimensions
- Section
- SPZ
- Length
- 487mm
Frequently asked questions
- How do I confirm the P-SPZ487 fits my drive?
- Check the marking on the back of the old belt for SPZ and 487. Also measure the top width and height to compare with the 9.7 mm and 8 mm dimensions of this belt.
- What should I send to get a quote?
- Send the part number P-SPZ487 by WhatsApp or email. If you do not have the number, send a photo of the belt marking and the pulley grooves so the team can identify the correct belt.
- Should I replace all belts on a multi-belt drive at once?
- Yes. On drives that use more than one belt, replace the full set at the same time so all belts carry the load evenly and wear at the same rate.