V-belt Movendis P-SPZ2957
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPZ2957 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPZ2957 and any equivalents.
When a narrow wedge V-belt needs replacing, the most reliable starting point is the belt itself. This Movendis P-SPZ2957 is an SPZ profile belt with a 2957 mm length, a 9.7 mm top width, an 8 mm height and a 40-degree angle. We carry it for maintenance, engineering and purchasing teams who order by part number.
To match it to the belt you are removing, read the marking on the back of the old belt and compare the profile and length. The profile here is SPZ, and the length is 2957 mm. If the old belt is worn or the marking is unreadable, measure the top width and height and check the angle before ordering.
The SPZ profile is a narrow wedge section, so it sits in a matching pulley groove rather than a classic V-belt groove. Confirm the replacement follows the same routing and sits correctly in the sheaves. If a drive uses more than one belt, replace the set together so the belts share the load evenly.
Send the part number P-SPZ2957 by WhatsApp or email to request a quote. Our team replies promptly and can help confirm the right belt or suggest an equivalent if you send the old belt marking or the drive details.
Dimensions
- Section
- SPZ
- Length
- 2957mm
Frequently asked questions
- How do I confirm this belt matches the one being replaced?
- Compare the profile and length on the old belt marking with SPZ and 2957 mm. Also check the top width of 9.7 mm, height of 8 mm and angle of 40 degrees if the marking is not clear.
- What information should I send with a quote request?
- Send the part number P-SPZ2957, and if possible the old belt marking or a photo of the drive. That helps us confirm the belt or suggest an equivalent.
- Should I replace more than one belt at a time?
- On a multi-belt drive, replacing the set together helps keep tension and load sharing consistent. Order the quantity you need by the same part number.