V-belt Movendis P-SPZ2650
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPZ2650 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPZ2650 and any equivalents.
The Movendis P-SPZ2650 is a narrow wedge V-belt in the SPZ profile, 2650 mm long, with a 9.7 mm top width, 8 mm height and 40-degree angle. Before you fit a replacement, inspect the drive and sheaves for wear, misalignment or damage that can shorten belt life. This belt is suited to industrial drives that call for an SPZ profile and a 2650 mm length.
Start by checking the sheaves. Look for worn grooves, cracks, burrs or a polished surface that can reduce grip. Confirm the sheaves are aligned and that the grooves match the SPZ profile. A sheave in poor condition will wear a new belt quickly, even when the belt itself is correct.
Next, check the drive for other issues: loose mounting, damaged guards, or excessive vibration. If the old belt failed early, find the cause before installing the new one. The P-SPZ2650 is a narrow wedge V-belt with a 9.7 mm top width, 8 mm height and 40-degree angle, and it runs in SPZ-profile pulleys.
When you request a quote, send the part number P-SPZ2650 and the quantity you need. If you are unsure whether this is the right belt for your drive, send the marking from the old belt and the sheave dimensions. The team can help confirm the SPZ profile and 2650 mm length, or suggest an equivalent.
Dimensions
- Section
- SPZ
- Length
- 2650mm
Frequently asked questions
- What does the marking on the old belt tell me?
- The marking usually includes the profile and length. For this belt, look for SPZ and 2650 mm, along with the brand and part number. If the marking is worn, measure the top width and outside length, or send a photo.
- Should I replace all belts on a multi-belt drive at the same time?
- Yes. On a drive with multiple belts, replace them as a set so they share the load evenly. Mixing a new belt with worn belts can cause the new one to carry more load and fail early.
- What information do you need for a quote?
- Send the part number P-SPZ2650 and the quantity. If you want us to confirm the belt, include the old belt marking, the sheave profile and the center distance. Photos of the drive and sheaves also help.