V-belt Movendis P-SPZ2150
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPZ2150 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPZ2150 and any equivalents.
The Movendis P-SPZ2150 is a narrow wedge V-belt with an SPZ profile and a length of 2150 mm. It is built for industrial drives that use narrow wedge belts to transmit power in a compact cross-section. Confirm fit by matching the profile and the length on the belt you are replacing.
Use this belt on drives designed for the SPZ profile, where the sheave groove and the belt cross-section must match. The 2150 mm length and the SPZ profile are the two dimensions to check against the old belt or the drive documentation. A belt that is too short or too long will not tension correctly, even if the profile looks similar.
The top width is 9.7 mm, the height is 8 mm and the included angle is 40 degrees. These dimensions define how the belt sits in the sheave groove. When you inspect the drive, look for worn grooves, misalignment and damaged sheaves before installing a new belt.
To request a quote, send the part number P-SPZ2150 by WhatsApp or email. If you are unsure whether this is the correct belt for your drive, include the profile and length from the belt marking or the drive nameplate, and the team can help confirm the right belt.
Dimensions
- Section
- SPZ
- Length
- 2150mm
Frequently asked questions
- How do I confirm that the P-SPZ2150 fits my drive?
- Check that your drive uses the SPZ profile and that the required belt length is 2150 mm. Compare these against the marking on the belt you are replacing or the drive documentation.
- What are the dimensions of this belt?
- The profile is SPZ, the length is 2150 mm, the top width is 9.7 mm, the height is 8 mm and the angle is 40 degrees.
- What information should I send with my quote request?
- Send the part number P-SPZ2150. If you are checking a replacement, also send the profile and length from the old belt or the drive nameplate so the team can help confirm the right belt.