V-belt Movendis P-SPZ1800
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPZ1800 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPZ1800 and any equivalents.
The Movendis P-SPZ1800 is a narrow wedge V-belt in the SPZ profile, 1800 mm long. It is built for industrial drives that need a compact, high-capacity belt. This page covers where this belt is typically used and how to confirm it fits your drive.
Narrow wedge V-belts like the SPZ profile are common on pumps, fans, compressors, and other driven equipment where space is limited but power demand is steady. The 40° angle and 9.7 mm top width by 8 mm height cross-section let the belt sit deep in the pulley groove for efficient torque transfer. If your drive uses SPZ pulleys, this belt is the correct profile family.
To confirm fit, check the old belt's back marking for the profile and length, or measure the outside length and compare it to 1800 mm. Also verify the pulley groove width matches the 9.7 mm top width. If the marking is worn, send us the drive make and model, pulley diameters, and center distance, and we will help you confirm the right belt or suggest an equivalent.
When replacing, inspect all pulleys for wear, alignment, and debris. On multi-belt drives, replace all belts as a set to keep tension even. Send the part number P-SPZ1800 by WhatsApp or email with your quantity, and our team will reply promptly with a quote.
Dimensions
- Section
- SPZ
- Length
- 1800mm
Frequently asked questions
- What does the SPZ profile mean for my drive?
- SPZ is a narrow wedge profile with a 9.7 mm top width, 8 mm height, and 40° angle. It fits pulleys machined for SPZ grooves. If your pulleys are SPZ, this belt will seat correctly.
- How do I confirm the length is right?
- Check the marking on the back of your old belt for the profile and length, or measure the outside length and compare it to 1800 mm. If you are unsure, send us your drive details and we will help you confirm.
- Can I replace just one belt on a multi-belt drive?
- It is best to replace all belts on the drive at the same time. Mixed wear can cause uneven tension and premature failure. Send us the quantity you need and we will quote the full set.