V-belt Movendis P-SPZ1320
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPZ1320 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPZ1320 and any equivalents.
The Movendis P-SPZ1320 is a narrow wedge V-belt with an SPZ profile and a 1320 mm length. Its 9.7 mm top width, 8 mm height and 40° angle identify the cross-section and fit for the drive. Use these dimensions to confirm the belt matches the pulley groove and the required length.
When selecting a replacement, start with the profile and length. SPZ defines the narrow wedge cross-section, while 1320 mm is the outside length. The 9.7 mm top width and 8 mm height sit in the pulley groove; the 40° angle is the included angle of the belt cross-section. A belt with the same profile but a different length will not fit the same drive layout.
The marking on the back of the old belt is the fastest way to identify what you are replacing. If it reads P-SPZ1320, this Movendis belt matches that part number. If the marking is worn or unreadable, measure the top width, height and length and compare them to these values. For a quote, send the part number P-SPZ1320, the profile SPZ, and the length 1320 mm, along with the quantity you need.
Narrow wedge V-belts are used in compact drives where a standard V-belt would be too wide. This SPZ profile is part of the Movendis narrow wedge V-belt series. We carry this belt and can confirm the right fit or suggest an equivalent when you provide the part number and the dimensions from your drive.
Dimensions
- Section
- SPZ
- Length
- 1320mm
Frequently asked questions
- What do the profile and length tell me about this belt?
- The SPZ profile defines the narrow wedge cross-section, and 1320 mm is the length. The top width is 9.7 mm, the height is 8 mm, and the angle is 40°. These dimensions must match the pulley groove and the drive layout.
- How do I confirm this is the belt I need?
- Check the marking on the back of the old belt. If it reads P-SPZ1320, this belt matches that part number. If the marking is not readable, measure the top width, height and length and compare them to 9.7 mm, 8 mm and 1320 mm.
- What information should I send for a quote?
- Send the part number P-SPZ1320, the profile SPZ, the length 1320 mm, and the quantity you need. If you are replacing a different belt, include the marking from the old belt and the dimensions you measured.