V-belt Movendis P-SPZ1287
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPZ
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPZ1287 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPZ1287 and any equivalents.
The Movendis P-SPZ1287 is a narrow wedge V-belt in the SPZ profile with a 1287 mm length. It is built for drives that use a 40-degree wedge belt. This page covers how to match it to the belt you are replacing.
Start with the belt on the drive. Read the marking on the back of the belt and note the profile and the length. The P-SPZ1287 is an SPZ profile belt with a 1287 mm length, a 9.7 mm top width, an 8 mm height and a 40-degree angle. These figures are the match points. If the old belt shows SPZ and 1287, this is the same size.
If the marking is worn off, measure the old belt instead. Check the top width and the height against the SPZ figures above, and confirm the length. Then check the drive: sheave groove condition, alignment and tension all affect how a new belt runs. If the drive uses more than one belt, replace the full set so the belts share the load evenly.
Send the part number, the profile and the length when you request a quote. A photo of the marking on the back of the old belt also helps. If the number is unreadable, send the drive details and we will help confirm the right belt.
Dimensions
- Section
- SPZ
- Length
- 1287mm
Frequently asked questions
- How do I confirm the P-SPZ1287 is the belt I need?
- Read the marking on the back of the belt being replaced. If it shows SPZ and 1287, it matches this belt. The P-SPZ1287 has a 9.7 mm top width, an 8 mm height and a 40-degree angle.
- What should I send to request a quote?
- Send the part number P-SPZ1287, or the profile and length from the old belt. A photo of the back marking helps us confirm the match.
- Should I replace more than one belt at a time?
- On a multi-belt drive, replace the full set at once. Belts of different wear run at different tensions and do not share the load evenly.