V-belt Movendis P-SPC3350

MOVENDIS P-SPC3350 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPC3350 and any equivalents.

The Movendis P-SPC3350 is a narrow wedge V-belt with an SPC profile and a length of 3350 mm. The profile and length are the two dimensions you need to match a belt to a drive. This page gives you the data to confirm the fit before you request a quote.

The SPC profile is a narrow wedge (also called narrow V-belt) cross-section. Narrow wedge belts are used where a standard V-belt would be too wide for the pulley groove. The 3350 mm length is the datum length for this belt. When you replace a belt, both the profile and the length must match the original, because a different profile will not sit correctly in the pulley and a different length will change the tension or alignment.

To confirm the P-SPC3350 is the right belt, check the marking on the back of the old belt. If it shows SPC and 3350, this is the direct match. If the marking is worn, measure the old belt or note the drive and pulley part numbers. Send the part number, profile, length, and a photo of the old belt marking to our team by WhatsApp or email. We carry the Movendis line and will reply promptly to confirm the belt or suggest an equivalent.

Narrow wedge V-belts are often used in multiple-belt drives. When you replace one belt on a multi-belt drive, replace all belts in the set at the same time so they share the load evenly. Inspect the pulleys for wear, alignment, and debris before installing the new belt. After installation, check tension according to the drive manufacturer's instructions.