V-belt Movendis P-SPB4820

MOVENDIS P-SPB4820 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPB4820 and any equivalents.

The Movendis P-SPB4820 is a narrow wedge V-belt in the SPB profile, with a length of 4820 mm, a top width of 16.3 mm and a height of 13 mm. The 40-degree angle is the standard wedge-belt flank angle, so the belt seats correctly in a matched SPB pulley groove. This page covers how to match the P-SPB4820 to the belt you are replacing.

Matching starts with the marking on the back of the old belt. Read the profile and the length off that marking and compare them with the SPB profile and 4820 mm length of this belt. If the old belt is unmarked, measure the top width across the back at 16.3 mm and the height at 13 mm, then check the outside length against 4820 mm before ordering.

Confirm the pulley groove is a true SPB section. A belt with the wrong profile will sit too high or too low in the groove and wear quickly, and a 40-degree flank angle only contacts the pulley walls correctly when the section matches. If the drive runs more than one belt, inspect every groove and replace the full set so the load stays evenly divided.

Once you have the marking or the measurements, send the part number or the details to our team through WhatsApp or email. We carry the Movendis P-SPB4820 and can confirm it against your drive or suggest an equivalent. Include the quantity and the drive it runs on so the reply is right the first time.