V-belt Movendis P-SPB4310
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPB4310 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPB4310 and any equivalents.
The Movendis P-SPB4310 is a narrow wedge V-belt in the SPB profile with a length of 4310 mm, a top width of 16.3 mm and a height of 13 mm. The 40-degree angle is built into the belt. To confirm it fits your drive, match these figures to the belt you are replacing.
Start with the marking on the back of the old belt. If it reads SPB and 4310, the P-SPB4310 is the same profile and length. Check the top width and height against the worn belt as well, since a stretched or damaged belt can measure slightly off.
If the old belt is unreadable, measure its length along the outside and its top width, then compare with the 4310 mm length and 16.3 mm top width listed here. The SPB profile and 40-degree angle identify the cross-section. Send the part number, profile, length and width when you request a quote and we will confirm the match.
Inspect the sheaves and the rest of the drive before fitting the new belt. Check for wear, alignment and any debris. On drives with more than one belt, replace the full set together so the load stays even across all belts.
Dimensions
- Section
- SPB
- Length
- 4310mm
Frequently asked questions
- How do I match the P-SPB4310 to the belt I am replacing?
- Compare the marking on the back of the old belt with the SPB profile and 4310 mm length. Also check the top width of 16.3 mm and height of 13 mm against the old belt.
- What are the dimensions of this belt?
- It is an SPB profile narrow wedge V-belt, 4310 mm long, with a 16.3 mm top width, a 13 mm height and a 40-degree angle.
- What should I send to request a quote?
- Send the part number P-SPB4310, or the profile, length and top width from the old belt. We will confirm the match and reply by WhatsApp or email.