V-belt Movendis P-SPB2380
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPB2380 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPB2380 and any equivalents.
The Movendis P-SPB2380 is a narrow wedge V-belt in the SPB profile with a 2380 mm length. When you are replacing a belt on a driven machine, match the profile and the length to the belt you are removing. This page gives the dimensions you need to confirm that match.
Start by reading the marking on the back of the old belt. If it shows SPB and 2380, the P-SPB2380 is the same profile and length. If the old belt is too worn to read, measure the top width and the outside length and compare them to the values here: SPB profile, 2380 mm length, 16.3 mm top width, 13 mm height, 40 degree angle. A belt with a different profile will not sit correctly in the pulley groove.
The SPB profile is a narrow wedge section. This belt has a 40 degree angle and a 13 mm height, and it is built for drives that use SPB pulleys. Confirm the pulley groove is clean and free of wear before fitting a replacement, and check the sheave alignment so the belt runs true. If the drive uses more than one belt, replace the full set at the same time so the load is shared evenly.
If you are unsure whether the P-SPB2380 matches the belt on your equipment, send a photo of the back marking and the pulley groove, or the machine make and model, by WhatsApp or email. The team can confirm the SPB profile and 2380 mm length against your application and help you identify the right belt.
Dimensions
- Section
- SPB
- Length
- 2380mm
Frequently asked questions
- How do I confirm the P-SPB2380 is the right belt for my drive?
- Check the marking on the back of the belt you are replacing. It should show the SPB profile and a 2380 mm length. You can also measure the top width and height: this belt has a 16.3 mm top width and a 13 mm height.
- What are the dimensions of the Movendis P-SPB2380?
- It is an SPB profile narrow wedge V-belt with a 2380 mm length, 16.3 mm top width, 13 mm height and a 40 degree angle.
- Can I replace just one belt on a multi-belt drive?
- On a drive that uses more than one belt, replace the full set at the same time. Mixing a new belt with worn belts can cause uneven load sharing and uneven wear.