V-belt Movendis P-SPB2300
- Brand
- MOVENDIS
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- SPB
- Series
- Narrow Wedge V-Belts
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
MOVENDIS P-SPB2300 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPB2300 and any equivalents.
The Movendis P-SPB2300 is a narrow wedge V-belt in the SPB profile, 2300 mm long. It measures 16.3 mm across the top, stands 13 mm high and runs a 40-degree angle. Before you fit it, take a few minutes on the drive itself.
Worn sheaves are the most common reason a new belt fails early. Check the groove flanks for ridging, scoring or a step worn into the side, and look for a shiny polished band where the belt has been riding. Measure groove wear with a sheave gauge where you can, and confirm the sheaves are aligned and free of runout. A belt seated in a worn groove sits too deep, slips and runs hot.
Confirm the replacement against the marking on the back of the old belt: SPB profile and 2300 mm length. Check the sheave groove width matches the 16.3 mm top width and that the groove angle suits the belt's 40-degree angle. Replace belts on a multi-belt drive as a matched set so the load stays even across the grooves, and keep the drive guards and ventilation clear.
Send us the part number P-SPB2300 by WhatsApp or email and our team will confirm the belt for your drive. If you are unsure of the profile or length, send a photo of the marking on the back of the old belt along with the sheave dimensions.
Dimensions
- Section
- SPB
- Length
- 2300mm
Frequently asked questions
- What are the dimensions of the Movendis P-SPB2300?
- It is an SPB profile narrow wedge V-belt, 2300 mm long, 16.3 mm top width, 13 mm height, with a 40-degree angle.
- Should I replace all belts on the drive at once?
- On a multi-belt drive, yes. Fitting one new belt alongside worn belts leaves the new one carrying more than its share of the load. Fit a matched set and check the sheaves at the same time.
- What do I need to send for a quote?
- Send the part number P-SPB2300 by WhatsApp or email. If you are confirming an existing drive, include the marking from the back of the old belt and the sheave groove details.