V-belt Movendis P-SPB2110

MOVENDIS P-SPB2110 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for P-SPB2110 and any equivalents.

The Movendis P-SPB2110 is a narrow wedge V-belt in the SPB profile, 2110 mm long, with a 16.3 mm top width, 13 mm height and a 40° angle. It is the belt to reach for when you are replacing an existing SPB-section drive belt and need the length to match. Confirm the profile and length against the belt you are removing before you order.

Matching this belt starts with the marking on the old belt. Look for the SPB profile designation and the 2110 mm length, then compare the top width and height: 16.3 mm and 13 mm. A narrow wedge V-belt in SPB section is not interchangeable with a different profile or a different length, so the numbers on the back of the belt are the first check. If the old belt is worn or the marking is gone, measure the outside length and the top width, and send those figures with your request.

A drive inspection is worth doing while you have the belt off. Check the sheave grooves for wear, confirm the pulleys are aligned, and look at the tensioning arrangement before the new belt goes on. If the drive runs more than one belt, replace them as a set so the load stays shared evenly across the grooves. Note the belt position and routing before removal if the drive is not a simple two-pulley layout.

When you request a quote, send the part number P-SPB2110, the quantity, and the application details you have. If you are unsure whether this is the correct belt, include the old belt's marking, the profile, the length in mm, and the top width and height. Our team can confirm the SPB profile and 2110 mm length and help you identify the right belt for the drive.